NEW ZEALAND & AUSTRALIA · COLLECTORS HUB

RELICZ SHIPPING ARMOUR

Give every buyer peace of mind with RELICZ purpose-built rigid shipping armour sheets that add another layer of protection to your graded slabs, top loaders and selected one-touch holders before you ship them off.

Concept retail packaging for RELICZ two-piece shipping protectors
Packaging concept only. Final appearance and stock to be confirmed.

The details that count.

Material
Corrugated polypropylene
Thickness
4 mm per sheet
Slab sheets
95 × 150 mm
Toploader sheets
95 × 130 mm
Each complete set
2 matching sheets

Check the outside dimensions of your holder, including any sleeve or bumper. Leave enough room to centre it safely inside the sheet edges.

CHOOSE YOUR ARMOUR

Build your pack.

Two-piece rigid protection for sending and storing your protected cards. Choose the sheet size, then your pack.

01 / Choose your size
02 / Choose your pack
NZ$20NZ$4 per set · + postage

1 set = 2 sheets. Cards, holders and sealing labels are not included. Ask us to confirm stock and dispatch timing before payment.

PACK WITH PURPOSE

Four steps. Ready for the journey.

01 / PROTECT

Start with the holder.

Keep the card in a suitable sleeve and rigid holder. Armour does not replace the holder.

Example of a basketball card protected by a clear sleeve and rigid holder.
02 / SANDWICH

One Relicz Armour sheet per side.

Centre your protected card between both Armour sheets.

Exploded view showing a protected card centred between two matching white Shipping Armour sheets, one on each side.
03 / SECURE

Keep it in place.

Secure the sheets with adhesive tape. Keep adhesive off the card and holder.

The two Armour sheets secured around the holder with tabs on the outer sheet edges, keeping adhesive away from the card and holder.
04 / PACK

Finish the parcel.

Place inside a suitable padded mailer or box. Fill empty space to prevent movement. Then its ready to ship off to its new home.

The secured Armour bundle going inside an open padded mailer with cushioning around it.

Choose with confidence. FAQ

Is Slab Armour only for PSA?

No. The larger size is called Slab Armour because it may suit different graded holders. Fit depends on the holder’s actual outside dimensions and thickness, not just the grading company. PSA, BGS, CGC, SGC and other holder versions must be checked individually; universal compatibility is not claimed.

Will a one-touch fit Toploader Armour?

Some one-touch holders may fit the 95 × 130 mm sheets, but sizes vary. Measure yours, allow clearance around the edges and confirm physical fit before relying on it. These are sheet dimensions, not a guaranteed internal holder capacity.

Is a five-set pack five sheets?

No. Five sets contain ten sheets. Each protected card uses two sheets, one at the front and one at the back.

Is it guaranteed against shipping damage?

No. Armour adds a rigid protective layer, but no packaging guarantees damage-free delivery. Appropriate fitting, securing and outer packaging are still required.

How do I order more?

Choose a size and pack above, add it to your enquiry, then send the enquiry to RELICZ. We’ll confirm stock, postage and payment details before you pay.